Tool list

In addition to the pressure gauge and fittings shown in the picture, a tachometer, CO meter and volt-ohmmeter are needed for testing the L-Jetronic system in the vehicle as described in this manual.

The pressure gauge KDEP 1034 is the same unit used to test Bosch K-Jetronic (CIS) systems and reads from 0-6 bar pressure. To use this gauge for testing vehicles with L-Jetronic, modify as shown below. Order the complete gauge and directional control valve under the number KDEP 1034. The directional control valve alone is available under the order number KDEP 1034/1.